Page 1 of 2

YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Sun May 03, 2020 10:17 pm
by MW0MWZ
Everyone, I worked on some changes for YSF2xxx modes today to see if I can fix up the issues with RX audio coming back from reflectors.

If you were seeing this issue, please update and give me some feedback here if this is now resolved or not for you.
If its not working I need to know what radio you are using please...

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Mon May 04, 2020 4:04 pm
by EB2AQH
Hi Andy,
Congrats, problem solved for YSF2DMR on all my YAESU C4FM devices.
FT-991
FTM100D
FT2D


Good job.
Thanks for your fantastic software.
73's
Inigo - EB2AQH

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Mon May 04, 2020 6:29 pm
by K3IM
Problem solved for YSF2DMR on all my YAESU C4FM device.
FT-70D

Thank you!!!

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Mon May 04, 2020 9:16 pm
by hk4cze
Problem solved here also FT2D FT70D.. Thanks Andy

Jorge HK4CZE

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Tue May 05, 2020 1:46 am
by M7SAV
Problem solved here also on my Yaesu ft3d.
Excellent work.
Cheers guys.
M7SAV.

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Tue May 05, 2020 9:19 am
by MW0MWZ
Great news - I *think* we fixed it...

Bizarrely it always worked for me, I have FT-2D and FTM-100D, both worked OK, I've ordered an FT-70D also but managed to fix it before it arrived..

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Wed May 06, 2020 7:32 pm
by EI2GLB
It works but I can't change TG's

If I push the X button I just get the YSF list and not the DMR List

I tried searching for #0??? and it can not find any Talk Group, have I to unlink through the software each time,

Thanks
Trevor

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Thu May 07, 2020 9:31 am
by MW0MWZ
Make sure you have YSF and YSF2DMR enabled and Wires-X Passthrough too, press the Wires X button, find YSF2DMR in the list, connect to that first.
Once you connect to YSF2DMR, search again and then you will see that its all of the DMR rooms.

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Sat May 09, 2020 6:34 am
by wb6dtb
Andy,
I am having the problem with no audio when using YSF mode with Pi-Star 4.1.1. I am not using any of the YSF cross modes built into Pi-Star but I am connected to a YSF reflector with Pi-Star on my FT2D Yaesu radio. If the other station I am in QSO with is also on the same YSF reflector there is no problem the audio comes through ok. The problem occurs when I am listening on YSF reflector and the other station is using a different mode DMR, D-Star or FCS room which are being hardware bridged to other modes including YSF using hardware bridging between modes with an SharkRF Openspot 1. This also occurs when the other system doing mode bridging is using software bridging. This problem has just recently started occurring but I cannot say just when so it may not be related to the recent Pi-Star update/upgrade from 4.1.0 to 4.1.1. I am using a raspberry pi3b+ using a Zumspot GPIO board. I have both WiresX passthrough and Upper case hostfiles turned off in the YSF Configuration section. If I remember correctly I have another hotspot running a raspberry Pi3b with a DVMega single frequency board attached and running the older Pi-Star 3.4.17 version, and it does not have this lost audio problem when using this same YSF connection to this external mode bridging system. I don't have this older Pi3b with me at this location so I can't verify this until next week when I return home.
Hope this helps you troubleshoot this lost audio problem. If I switch Pi-Star from YSF reflector to an FCS reflector using this same external cross mode system there is no lost audio between FCS on my FT2D and the other station using DMR, D-Star or YSF. I can hear YSF audio transmission when I am using FCS mode, but the other station then also using Pi-Star on YSF mode does not hear my audio, so audio goes out on YSF but not heard on YSF.

Dave

Re: YSF2DMR / YSF2NXDN / YSF2P25 - No RX from Network

Posted: Wed Jul 01, 2020 8:29 pm
by K2CQW
MW0MWZ wrote:
Thu May 07, 2020 9:31 am
Make sure you have YSF and YSF2DMR enabled and Wires-X Passthrough too, press the Wires X button, find YSF2DMR in the list, connect to that first.
Once you connect to YSF2DMR, search again and then you will see that its all of the DMR rooms.
That seems to work, but I would like to connect to a specific TG, for example TG 8802. I tried #08802, no joy. America-link is TG 31656, #31656 doesn't work either. CQ-UK is TG2351, #02351 no good. Sometimes connecting to YSF2DMR searching ALL works, sometimes not.

***Update***
I had my first real DMR chat this morning with Charles, NK8O on Baynet, TG 31075. Charles gave me an excellent audio report. Hooray for Pi-Star