Page 1 of 1
how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection
Posted: Thu May 21, 2020 5:18 pm
by kp4msr
Hello, how can i configure pi-star to reconnect automatically to a YSF reflector is connection is loosed.
I tried using export mode setting the reflector1 and reconnect parameters as shown in attachmetn but this dont works.
Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection
Posted: Thu May 21, 2020 5:51 pm
by n9mxq
Mine has Reconnect1 set to 0, and has always connected..
Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection
Posted: Thu May 21, 2020 6:24 pm
by kp4msr
i tried that but not working, its still disconnected and i need to manually reboot the jumbo spot to reconnect.
- not-linked.JPG (73.58 KiB) Viewed 3958 times
Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection
Posted: Thu May 21, 2020 8:46 pm
by M1DNS
Why are you editing the ircddbgateway panel? That's associated with the dstar mode. For YSF you should be making changes in the YSF gateway. (YSF GW)
admin/expert/edit_ysfgateway.php
Sent from my SM-G935F using Tapatalk
Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection
Posted: Thu May 21, 2020 11:50 pm
by kp4msr
YSF GW dont have any parameter named "reconnect".
Do you know what parameter need to modify?
its there a wiki page or something where we can check out the parameters purposes ?
Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection
Posted: Fri May 22, 2020 6:47 am
by VK7HSE
Scroll down towards the bottom of the ysfgw config and look for the network and change revert from 0 to 1 and ensure that you have the target in the start up (most likely already is)
Sent from my Pixel 4 XL using Tapatalk
Re: how to setup pi-star to automatically reconnect to the YSF Reflector if looses connection
Posted: Fri May 22, 2020 1:54 pm
by SP2ONG
I suppose that problem exists for all XXXgateway programs. I have the same problem with NXDN and P25 reflector (NXDNGateway and P25Gateway)
https://github.com/g4klx/NXDNClients/issues/91