I am using Pi-Star Version 4.1.4 on crossmode YSF2P25.
The Rapsberry Pi Zero is using MMDVM.
This mode is not working correct because of destroyed modulation.
Any solution ?
YSF2P25 not working correct
Re: YSF2P25 not working correct
I think this will be due to codec incompatibility, if you have DN mode set then try VW mode on your Yaesu radio.
--
Brian G8SEZ
Brian G8SEZ
Re: YSF2P25 not working correct
Did you resolve your problem? I'm running 4.1.4 also and having the same issue. Radio won't stay in vw mode because it seems Pi-Star is tx in DN mode.
Re: YSF2P25 not working correct
Same issue here. Audio is garbled.
Re: YSF2P25 not working correct
Same issue here. Hotspot is forced into DN mode...all garbled.
Sent from my SM-A102U using Tapatalk
Sent from my SM-A102U using Tapatalk
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.
Re: YSF2P25 not working correct
Same issue here, its all garbled on 4.1.4, sounds like someone is using ADP or EDP encryption.
73 de WX9KVH
73 de WX9KVH
Re: YSF2P25 not working correct
Its ready for testing, and I could use some feedback - so please try it.
Re: YSF2P25 not working correct
Seems to be working here now.
AntiSquid Disclaimer: All messages posted are personal opinion only and may not constitute fact.
Re: YSF2P25 not working correct
excellent, I pushed a patch upstream, Andy should pull that in when he sees it.