Hi guys,
Ever since doing a manual update, I have not been able to shutdown my pi-star from my radio. Up until then, it all worked fine. I have checked all settings and nothing has changed.I have been using 99995 to shut down as the original 99996 has been given to a Chinese reflector. This all applies to YSF only. Any ideas guys?
pi-star shutdown
Re: pi-star shutdown
HI,
Remote services are running and nothing has changed, reboot,service kill, do not work either.
Remote services are running and nothing has changed, reboot,service kill, do not work either.
Re: pi-star shutdown
The remote commands work by parsing the log files. Do you still have logging enabled at default level and do you see corresponding entries in MMDVM log file?
Re: pi-star shutdown
I am sorry to say that all this talk of strings and non existant reflectors is way above my head and I do not understand any of it. But I do appreciate your help in this matter.
Re: pi-star shutdown
Here is what the log is showing.
M: 2021-12-20 22:16:46.000 YSF, received network data from VK3TDH-ND to DG-ID 0 at VK3TDH
M: 2021-12-20 22:16:46.426 YSF, received network end of transmission from VK3TDH-ND to DG-ID 0, 0.7 seconds, 0% packet loss, BER: 0.0%
M: 2021-12-20 22:17:17.498 YSF, received RF header from VK3TDH to DG-ID 0
M: 2021-12-20 22:16:46.000 YSF, received network data from VK3TDH-ND to DG-ID 0 at VK3TDH
M: 2021-12-20 22:16:46.426 YSF, received network end of transmission from VK3TDH-ND to DG-ID 0, 0.7 seconds, 0% packet loss, BER: 0.0%
M: 2021-12-20 22:17:17.498 YSF, received RF header from VK3TDH to DG-ID 0
Re: pi-star shutdown
That is exactly what it shows when I try to shutdown.
Re: pi-star shutdown
The Yaesu radios will not accept six digit codes.
Re: pi-star shutdown
Thanks for all your help...the Yaesu radios use the ysf dtmf tones for inputting reflectors and remote codes and use only 5 digits.