Page 1 of 1

"TG 0"

Posted: Sat Apr 28, 2018 5:04 pm
by N6MIK
About 20% of P25 traffic from the net is showing up a coming from Talkgroup 0 - any idea what is causing this or how I can fix it? Thanks!
N6MIK

Re: "TG 0"

Posted: Sat Apr 28, 2018 10:17 pm
by MW0MWZ
I doubt there will be anything to fix, that will be what the network shows.

Re: "TG 0"

Posted: Thu May 03, 2018 10:31 pm
by N6MIK
Thank you Andy.

I took another look at the history - and TG0 only happens with significant loss percentages. In my case, 7 of the last 10 activity log entries were "TG0" and between 6% and 22% 'loss', and all were unique callsigns.

Is loss tied to high BER on the remote side, or more of a local network/internet packet loss? If the latter, I'll investigate my connections! I'd like to find a remedy, as my radios do not unmute on TG0 - so I miss quite a bit of traffic...

Thanks again!
N6MIK

Re: "TG 0"

Posted: Fri May 04, 2018 12:30 pm
by MW0MWZ
BER relates to RF losses, Loss is packet loss.

It could be at the ingress to the network point (so remote side repeater to the reflector) or it could be between the reflector and your hotspot / repeater, that I cannot answer, for your own system, if its on WiFi make sure the signal is good and that the WiFi channel is as clear as possible - there are some good tools for android to see what use the RF spectrum near you is getting. If its wired just make sure your internet is working ok, not much else you can check really.