forum.pistar.uk

No, I get the same result with "MMDVM_HS_HAT (DB9MAT & DF2ET) for GPIO" setting. All 3 repeaters function OK. The issue is only the lower left dashboard text:

1) My repeaters running a ZUM Radio MMDVM board (Pi hat).
DISPLAY: "Not Linked".

2) My repeater running a STM32-DVM board (Pi hat).
DISPLAY: "Service Not Started".

The connected reflector / TG should be displayed.

Tom / K5TRA

I also get "service not started"

Sent from my SM-A102U using Tapatalk

@MW0MWZ when you get a chance could you please take a look at this issue

Cheers

Sent from my Pixel 4 XL using Tapatalk

A more serious issue, though.. along with this, it seems the Hotspot is forced into DN mode even when you go into it in VW mode.

VK7HSE wrote: ↑Mon Feb 08, 2021 6:33 pm @MW0MWZ when you get a chance could you please take a look at this issue

Cheers

Sent from my Pixel 4 XL using Tapatalk

Yep I'm on it...

Initial progress, dashboard should be fixed, P25 mode should no longer show service not started, and should show where you are linked.

Confirmed the newest version of YSF2P25 isnt working correctly - it's actually *very* interesting as to why this is, I wont bore you with that at the moment, but I need to patch YSF2P25 in order for it to answer WireX commands in DN, and voice in VW.

OK I think I have YSF2P25 working - taking a quick break to grab some food, and then I'll do a little more testing before pushing the update.

Andy, this is really good news!
Thank you for the time and work that you invest here!

DO4CZ wrote: ↑Mon Feb 08, 2021 7:50 pm Andy, this is really good news!
Thank you for the time and work that you invest here!

Ready for testing....

Seems to be working okay on my setup here. Thanks!

20210208 It has been fixed.