Can someone tell me what the "WiresX Passthrough" switch does in the YSF panel?
Also what does "UPPERCASE Hostfiles" do, while we are in the area.
Just curious, thanks,
Dave, KC6N
WiresX Pass Through?
Re: WiresX Pass Through?
WiresX Passthrough – If you are using any of the YSF cross-modes, this provides a method to pass the WiresX commands from your radio through to the cross mode, so you can drive everything from the radio. For more info, see viewtopic.php?f=6&t=1394
UPPERCASE Hostfiles – Some Yaesu radios—for example, the FT-70D—support searching YSF and FCS rooms only in UPPERCASE. Once this option is enabled, whenever a Pi-Star Update is performed, the hostfiles containing YSF and FCS rooms will be converted to UPPERCASE.
UPPERCASE Hostfiles – Some Yaesu radios—for example, the FT-70D—support searching YSF and FCS rooms only in UPPERCASE. Once this option is enabled, whenever a Pi-Star Update is performed, the hostfiles containing YSF and FCS rooms will be converted to UPPERCASE.
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Re: WiresX Pass Through?
Thanks for the reply. I had not seen the note.