Hi all
Looking for help on this.
DMR Gateway
Network 1
Slot 1 & 2
read-write 5057 to 234999 (APRS private call)
What is the line off code / codes required?
Where do I add the lines of code?
Many thanks
Norman
Read-write 5057 to 234999
Re: Read-write 5057 to 234999
I think I have got it down to one off the below
PCRewrite=1,5057,1,234999,1
PCRewrite=2,5057,2,234999,1
or
PCRewrite=1,5057,1,234999
PCRewrite=2,5057,2,234999
.
PCRewrite=1,5057,1,234999,1
PCRewrite=2,5057,2,234999,1
or
PCRewrite=1,5057,1,234999
PCRewrite=2,5057,2,234999
.
Re: Read-write 5057 to 234999
Can anyone confirm this is correct ????
This seams to work
PCRewrite=1,5057,1,234999,1
PCRewrite=2,5057,2,234999,1
Set in
nano /etc/dmrgateway
Under Network 1
.
This seams to work
PCRewrite=1,5057,1,234999,1
PCRewrite=2,5057,2,234999,1
Set in
nano /etc/dmrgateway
Under Network 1
.
Re: Read-write 5057 to 234999
If it works, that's great.
I don't think that you need to specify both time-slots, most likely you only need PCRewrite=2,5057,2,234999,1 You could check which time slot is being used on the Pi-Star Dashboard
Alternatively, you could edit the radio/code plug "APRS TG" and replace 5057 with 234999 in the APRS/Digital section.
You would still need to ensure that private call rewrite rules includes TG 234999, which should be covered by PassAllPC=2, otherwise PCRewrite=2,234999,2,234999,1
I don't think that you need to specify both time-slots, most likely you only need PCRewrite=2,5057,2,234999,1 You could check which time slot is being used on the Pi-Star Dashboard
Alternatively, you could edit the radio/code plug "APRS TG" and replace 5057 with 234999 in the APRS/Digital section.
You would still need to ensure that private call rewrite rules includes TG 234999, which should be covered by PassAllPC=2, otherwise PCRewrite=2,234999,2,234999,1
Re: Read-write 5057 to 234999
The issue is we have two DMR systems in this area.
DMR+ use 5057 and we use 23499.
But when they program in a BM repeater they can not change the APRS setting as they only have one filed to fill in.
So as they use 5057 more on DMR+ when they do use a BM repeater they still send out 5057.
(Unlike the Anytones that now can have 8 APRS settings)
I have tested PCRewrite=1,5057,1,234999,1 and PCRewrite=2,5057,2,234999,1 all seams to work.
Also sending APRS via 234999
Also they can use both slots for APRS so just wanted to make sure both Slots is covered for when this happens.
Over the next week I will see if it needs any tweaks, if others post I need to.
Many thanks
Norman
DMR+ use 5057 and we use 23499.
But when they program in a BM repeater they can not change the APRS setting as they only have one filed to fill in.
So as they use 5057 more on DMR+ when they do use a BM repeater they still send out 5057.
(Unlike the Anytones that now can have 8 APRS settings)
I have tested PCRewrite=1,5057,1,234999,1 and PCRewrite=2,5057,2,234999,1 all seams to work.
Also sending APRS via 234999
Also they can use both slots for APRS so just wanted to make sure both Slots is covered for when this happens.
Over the next week I will see if it needs any tweaks, if others post I need to.
Many thanks
Norman
Re: Read-write 5057 to 234999
Ok, understood.
So it seems to be working for you, that's great
Stephen
So it seems to be working for you, that's great
Stephen
Re: Read-write 5057 to 234999
Update
PCRewrite=1,5057,1,234999,1
Keeps getting removed from
/etc/dmrgateway
Need to rerun my tests to see if Slot 1 is redirected from 5057 to 234999
Update
So Slot 1 does not redirect
.
.
PCRewrite=1,5057,1,234999,1
Keeps getting removed from
/etc/dmrgateway
Need to rerun my tests to see if Slot 1 is redirected from 5057 to 234999
Update
So Slot 1 does not redirect
.
.
Re: Read-write 5057 to 234999
This now works under Gateway for both slots
PCRewrite0=1,5057,1,234999,1
PCRewrite1=2,5057,2,234999,1
Not sure if I need the 1 on this after PCRewrite1 = PCRewrite1=2,5057,2,234999,1
Norman
PCRewrite0=1,5057,1,234999,1
PCRewrite1=2,5057,2,234999,1
Not sure if I need the 1 on this after PCRewrite1 = PCRewrite1=2,5057,2,234999,1
Norman
Re: Read-write 5057 to 234999
This is what I ended up using under Gateway.
PCRewrite0=1,5057,1,234999,1
PCRewrite0=1,234999,1,234999,1
PCRewrite1=2,5057,2,234999,1
PCRewrite1=2,234999,2,234999,1
So far it seams to be working as it should.
.
PCRewrite0=1,5057,1,234999,1
PCRewrite0=1,234999,1,234999,1
PCRewrite1=2,5057,2,234999,1
PCRewrite1=2,234999,2,234999,1
So far it seams to be working as it should.
.