VK3HAW wrote:
My understanding is that once you do "Full Edit" in expert, then if you make any changes under the "Config" Tab, then the full edit changes may be overwritten. I cannot confirm this.
Cheers
Stephen VK3HAW
Correct, once you start making changes within the expert pages, stay with using the expert pages.
Seems like you worked it out ok. There seems to be 2 places this can be entered, in the "Configuration" page, General Configuration section. This info must be written to "Configuration/Expert/DMR GW" in the [Info] section. If you edit in the Configuration page it will probably disable TGIF in the Expert page DMR GW (Enabled =0, and you will have to change it back to Enabled =1)
You could also change the "Options" in the Expert [DMR Network 2] section to suit yourself:
Name=DMR+_IPSC2-VKHOTSPOT
Options="TS1_1=3809;TS1_2=40008;TS2_1=505;"
Hi Alan
Very short transmissions from DMR+ network seems to give a high packet loss. The longer the transmission the more accurate the packet loss that is reported (0.8 sec gives 42% packet loss).
BM seems to drop those initial lost packets.
There may be a setting somewhere, but I don't know how to fix it.
Thanks - both answers make sense.
I've increased jitter to 560 and I get 0% loss
But on the other hand - knowing that it makes no real difference is good. I don't need anything from the people keying up
Alan