Any chance of upgrading to 4.1.0 (release) without having to re-install?
Thanks!
Upgrade from 4.0.0.RC4
Upgrade from 4.0.0.RC4
73 from David, Edinburgh
https://www.satsignal.eu
https://www.satsignal.eu
Re: Upgrade from 4.0.0.RC4
In short - no...
4.0 used an older version of Raspbian, 4.1 uses the new buster release.
4.0 used an older version of Raspbian, 4.1 uses the new buster release.
Re: Upgrade from 4.0.0.RC4
Fortunately the back-up and restore feature makes this nice and simple.
--
Brian G8SEZ
Brian G8SEZ
Re: Upgrade from 4.0.0.RC4
Thanks. The OS upgrade is a pain, as I have many other things on that RPi which therefore need to be re-installed (SNMP, MRTG monitoring, CPU temperature, SAMBA, NTP configuration, etc.).
73 from David, Edinburgh
https://www.satsignal.eu
https://www.satsignal.eu
Re: Upgrade from 4.0.0.RC4
I see, well it doesn't work for your setup but Pistar is supposed to be a standalone image.
Sorry!
Sorry!
--
Brian G8SEZ
Brian G8SEZ
Re: Upgrade from 4.0.0.RC4
I use the full image just as normal, it's just that I need to add quite a few things afterwards - mostly for monitoring but also to add a GPS/PPS for better timekeeping. All done and dusted now.
73 from David, Edinburgh
https://www.satsignal.eu
https://www.satsignal.eu