YSF2DMR version 4 stable.

[M6KKW]

Hi,

Downloaded and flashed the stable version of Pi-Star 4.
I copied the backup up of the Pi-Star config.zip into the root of the SD card (so in other words the settings are indentical).
Booted the Pi 0 W and left it for an hour.
It connected to my wifi fine and all my settings were populated corrrectly.
I did an update.
Now when I connect to #00002 (YSF2DMR) and join a talkgroup, I can be heard, but I can't hear the room. (tested on 3 or 4 TG)
Does anyone have and suggestions ?
For the time being I have reverted back to version 3. and that is working fine.
Cheers
Nick
M6KKW
Radio being used for testing (Yaesu FT2D)

[M1DNS]

Yep, you'll find a few post relating to this.
It's an issue with some radios that others don't see.

There's also an issue in some instances where updating with an earlier saved config is screwing things up.

Reburn the card a continue the setup with a manual configuration.

Sent from my SM-G935F using Tapatalk

[M6KKW]

Hi Andrew,

Flashed a card from scratch with version 4.1.
Manually reconfigured the dashboard checked my hotspot on Brandmeister.. Been recognised.
I used the YSF parrot room to test BER its at 0.3%
Still the same issue I'm afraid.
I have tested it using hubnet. (i have an allstar node)
I can talk into the TG 23526 (hubnet), but I cant hear the replies. (except via my allstar node)
Frustrating
Thanks for your help.
Regards
Nick
M6KKW
Yaesu FT2D

[M6KKW]

To added to that. Just tested it on my 991a... Same issue.
Nick
M6KKW

[M6KKW]

Something I just noticed. The radio appears to be recieving the signal (green light flashing when there is a transmission in progress), just doesn't seem to be able to decode the signal.

Nick
M6KKW

[M1DNS]

Is it the green light I thought that was fm though YSF was the blue light. ???

Talking things all-star I've had one setup up for a little time as well connecting to our local YSF reflector. Which also feeds over to a local DMR Tg. When I tested it it ran fine over DMR and YSF using ft1 ft2 handhelds but not with a ftm100 or 400 yaesu mobile radios. All-star traffic wasn't received by those mobile radios but it did on the handhelds. These yeasu radios are kinda strange in how they work with anything except wires X. I solved the all-star issue by changing over to a different set of binaries, but it is weird how some yaesu radios worked, whilst others didn't.

Sent from my SM-G935F using Tapatalk

[M6KKW]

M1DNS,

Thanks for your reply. unfortunately, i'm not a linux guru. So I will have to stick to version 3 for the time being.

Regards
M6KKW

[M6KKW]

Is it the green light I thought that was fm though YSF was the blue light. ???

Talking things all-star I've had one setup up for a little time as well connecting to our local YSF reflector. Which also feeds over to a local DMR Tg. When I tested it it ran fine over DMR and YSF using ft1 ft2 handhelds but not with a ftm100 or 400 yaesu mobile radios. All-star traffic wasn't received by those mobile radios but it did on the handhelds. These yeasu radios are kinda strange in how they work with anything except wires X. I solved the all-star issue by changing over to a different set of binaries, but it is weird how some yaesu radios worked, whilst others didn't.

Sent from my SM-G935F using Tapatalk

Green light was the point.

[N7DSG]

Same issue with FT3D. Using ysftodmr connects to DMR TG but no audio.

[M6KKW]

Now working.