I thought I would have a go at setting up my MMDVM to talk DMR to the Brandmeister network, but all it does is alternate the status between RED and GREEN. I have tried ssh'ing and looking at the logfile, but only shows :-
M: 2020-07-20 07:17:34.588 DMR, Opening DMR Network
On the Brandmeister screen, it shows my DMR id(s) (2352971 & 235297101), both with RED circles, to me indicating it hasn't made a connection, backed up by the fact that on the Profile screen, I see this.
G4TVP's DMR IDs
ID Repeater Last seen TX time this week
2352971 1970-01-01 1:00:00 0s
Here is the configuration from Configuration page:
DMR Master: BM_United_Kingdom_2341
Hotspot Security:••••••••
BrandMeister Network: Repeater Information | Edit Repeater (BrandMeister Selfcare)
DMR ESSID: 235297101
DMR Colour Code: 1
DMR EmbeddedLCOnly:
Enable DMR Embedded LC Only
DMR DumpTAData:
DMR Dump T-A Data
I've tried googling and can't see any clues as to what might be wrong, only some suggestions to look at the Expert screen. The Pi was setup to do Dstar and that was working fine. I've tried updating, to no avail. I have checked that my Hotspot password's match, but perhaps if I could get some more debugging info, I can tell what it's not liking.