Hi,ALL.
I use Nano PI NEO and Pi-Star 3.4.15.
The Nano Pi Neo has Serial Console port.
It's already holds agetty(Serial Console).
Plsease teach me about stop agetty and use Nextion display setting.
It's port supplies GND and +5V,It's conenects,Can Display Intial Screen,but no change Infomation.
The Nextion Display was checked at USB to Serial dongle(/dev/ttyUSB0).
Thank you.
JE4SMQ MASA
I want use to Serial Console port for Nextion DIsplay
Re: I want use to Serial Console port for Nextion DIsplay
I don't believe that its going to work, the serial console is used as *THE* output device on those (since there is no video) before the kernel is even booted.
If I remember right they have two UART available on the GPIO pins already, you would do better using one of those.
If I remember right they have two UART available on the GPIO pins already, you would do better using one of those.