Hi Folks,
I'll put a question forward that I have had presented to me a number of times regarding prioritising modes:
" I have my Hotspot configured for both DMR and P25. With linked systems here in VK often P25 takes over, meaning that if I want to transmit on DMR it becomes nearly impossible - until P25 traffic clears. Is there a way that I can configure my duplex hotspot to prioritise incoming DMR requests over P25?"
I fully understand why this occurs (so no newbie-based responses on this please). Is there a way of prioritising one mode over another - on a duplex hotspot - based on a request to Tx being received by the hotspot?
Using multiple hotspots is not a good solution (but for reference it is what I often do here; 1 hotspot per mode) so please exclude this in any responses.
If not can this please be investigated as a future PiStar configuration enhancement?
73,
Steve I
VK3VM / VK3SIR
Prioritising Mode Contact (i.e. DMR say over P25)
Help with DMR issues
Return to “DMR Specific Support”
Jump to
- Pi-Star Information
- ↳ Announcements
- ↳ Feature Requests
- ↳ FAQ
- Software Support
- ↳ Pi-Star General Support
- ↳ WiFi Setup
- ↳ IP Networking
- ↳ D-Star Specific Support
- ↳ DMR Specific Support
- ↳ YSF Specific Support
- ↳ P25 Specific Support
- ↳ NXDN Specific Support
- ↳ POCSAG Specific Support
- Hardware Support
- ↳ Raspberry Pi Foundation Hardware
- ↳ Friendly Arm Nano Pi Neo / Neo Air
- ↳ Hardkernel Odroid XU3 / XU4
- ↳ Orange Pi Zero
- ↳ Nextion Screens
- ↳ OLED Screens
- ↳ ZUMSpot (Hat / Libre / USB)
- ↳ MMDVM_HS Hat(s)
- ↳ DV-Mega Hat(s)
- ↳ DV-Mega GMSK Arduino
- ↳ DVAP Dongle
- ↳ DVR-PTR V1 V2 V3
- ↳ Other MMDVM Modem Boards
- ↳ Other All-in-one Boards with included RF
- ↳ Radio Equipment
- Repeater Keepers
- ↳ Software Support
- ↳ Hardware Support
- ↳ Everything Else
- Tutorials
- ↳ W1MSG Video Tutorials
- ↳ User Submitted Video Tutorials
- ↳ Tips and Tricks
- General Conversation
- ↳ Share your stuff
- ↳ I'm new here
- ↳ CQ CQ CQ
- ↳ I need to vent
- ↳ The Bar