Time between modes to avoid QSO disruption.
Time between modes to avoid QSO disruption.
I have a repeater using Pi-Star and MMDVM for both DMR and D-Star mode. I find out that my D-Star QSO would be disrupted by traffic initiated from a DMR TalkGroup over the network. Is there a way to set Pi-Star to prioritized RF traffic and stick to a mode for x minute before allowing different mode traffic to coming from the Net?
Re: Time between modes to avoid QSO disruption.
in mmdvnhost expert you have settings for mode hang time and net hang time. Whilst it wont completly solve your issue altering the values there will help.
/admin/expert/edit_mmdvmhost.php
Sent from my SM-G935F using Tapatalk
/admin/expert/edit_mmdvmhost.php
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: Time between modes to avoid QSO disruption.
My RF and NET hang time are all set to default 300 which I think is 5 minutes. I don't know if it will prevent MMDVM to switch modes while a QSO is going on.
Re: Time between modes to avoid QSO disruption.
The longer the mode hang time you set, the longer it will hold that mode before it drops to idle, where any mode can pick it up.
The longer the net hold setting the longer it wil hold off on permiting another mode as it comes in over the net.
Sent from my SM-G935F using Tapatalk
The longer the net hold setting the longer it wil hold off on permiting another mode as it comes in over the net.
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: Time between modes to avoid QSO disruption.
In practices, I observed that a DMR traffic initiated from Brandmeister ignored any Hang time settings and switch modes right after I unkeyed my D-Star radio.
Re: Time between modes to avoid QSO disruption.
Then you prob. have a setting somewhere set incorrectly.
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: Time between modes to avoid QSO disruption.
Any clues on what settings maybe triggering this?