Red Highlighted Frequency

[W0EDN]

When setting up Pi-Star in Config, why is the frequency cell highlighted in RED for one frequency, and for other frequencies I input it turns to a GREEN highlight?

/W0EDN

[G8SEZ]

It's to prevent you setting it up with a frequency in the UHF satellite allocation, 435 to 438 MHz.

[MW0MWZ]

It's to prevent you setting it up with a frequency in the UHF satellite allocation, 435 to 438 MHz.

Or setting one that is out of band, it wont stop you setting that frequency - but the MMDVM_HS firmware will stop MMDVM from starting if you pick a frequency in the satellite band.

[W0EDN]

Thank you for the information..../W0EDN