So I have 3 Hotspots Running at the Moment.
During Screensaver
1 has IDLE running Horizontal across the Screen
1 has MMDVM Vertical
1 has 1 white Pixel like Snow across the Screen..
How can I make them the Same ?..
Thanks
Rob..
MW1COE
OLED Screensaver Variations
Re: OLED Screensaver Variations
All Pistar run v4.1,2
Dashboard 20200528
Rob..
Dashboard 20200528
Rob..
Re: OLED Screensaver Variations
In the configuration for each hotspot, are the Display Types, Ports and Layouts consistent with each other?
Re: OLED Screensaver Variations
i upgraded from vers 3 cant remember believe it was 3.14
did not have IDLE
using same and only pi-star burned new sd disk and installed 4.1
now at 4.3 dashboard 2021013
now have IDLE - new addition CW TX then IDLE
In Expert OLED LogoScreensaver tried other than 1 no help - most stopped screen saver
But not a hardware issue -
Bob NB2G
did not have IDLE
using same and only pi-star burned new sd disk and installed 4.1
now at 4.3 dashboard 2021013
now have IDLE - new addition CW TX then IDLE
In Expert OLED LogoScreensaver tried other than 1 no help - most stopped screen saver
But not a hardware issue -
Bob NB2G