MMDVM POG DMR issue

Help with other MMDVM Repeater Boards (with NO onboard RF)
Post Reply
m0ljl
Posts: 1
Joined: Mon Apr 16, 2018 8:41 am

MMDVM POG DMR issue

Post by m0ljl »

I have set up a high power hotspot or gateway as its called here in the UK

Tx is Yaesu FTM100D
Board is MMDVM POG on a RPI 3B

FUSION AND DSTAR WORKING FINE

On DMR I am able to communicate fine using my anytone radio, low BER no problem and audio perfect

But my TYT MD380 and Motorola will not pass audio on receive.

I have checked RX groups and set 380 to promiscuous, double checked slot and color code but still no audio, just the busy light comes on to say its receiving,

I hear my echo audio back through anytone radio but the 380 and Motorola does not.

Any ideas please ?
Kind Regards
M1DNS
Pi-Star Team
Posts: 925
Joined: Thu Apr 05, 2018 5:30 am

Re: MMDVM POG DMR issue

Post by M1DNS »

Try adjusting the rx offset in Mmdvmhost to find the sweet spot for all three radios.

admin/expert/edit_mmdvmhost.php

Sent from my SM-G935F using Tapatalk

Andrew M1DNS.
Pi-star Admin Team.
g7kbr
Posts: 70
Joined: Thu Nov 01, 2018 1:03 pm

Re: MMDVM POG DMR issue

Post by g7kbr »

m0ljl wrote:I have set up a high power hotspot or gateway as its called here in the UK

Tx is Yaesu FTM100D
Board is MMDVM POG on a RPI 3B

FUSION AND DSTAR WORKING FINE

On DMR I am able to communicate fine using my anytone radio, low BER no problem and audio perfect

But my TYT MD380 and Motorola will not pass audio on receive.

I have checked RX groups and set 380 to promiscuous, double checked slot and color code but still no audio, just the busy light comes on to say its receiving,

I hear my echo audio back through anytone radio but the 380 and Motorola does not.

Any ideas please ?
Kind Regards
Hi

Did you ever sort your POG issues out?

I am just about to use my hammer tool on the two versions of boards I have.

Regards

Paul


Sent from my iPhone using Tapatalk
Post Reply