I have set up a high power hotspot or gateway as its called here in the UK
Tx is Yaesu FTM100D
Board is MMDVM POG on a RPI 3B
FUSION AND DSTAR WORKING FINE
On DMR I am able to communicate fine using my anytone radio, low BER no problem and audio perfect
But my TYT MD380 and Motorola will not pass audio on receive.
I have checked RX groups and set 380 to promiscuous, double checked slot and color code but still no audio, just the busy light comes on to say its receiving,
I hear my echo audio back through anytone radio but the 380 and Motorola does not.
Any ideas please ?
Kind Regards
MMDVM POG DMR issue
Re: MMDVM POG DMR issue
Try adjusting the rx offset in Mmdvmhost to find the sweet spot for all three radios.
admin/expert/edit_mmdvmhost.php
Sent from my SM-G935F using Tapatalk
admin/expert/edit_mmdvmhost.php
Sent from my SM-G935F using Tapatalk
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: MMDVM POG DMR issue
Him0ljl wrote:I have set up a high power hotspot or gateway as its called here in the UK
Tx is Yaesu FTM100D
Board is MMDVM POG on a RPI 3B
FUSION AND DSTAR WORKING FINE
On DMR I am able to communicate fine using my anytone radio, low BER no problem and audio perfect
But my TYT MD380 and Motorola will not pass audio on receive.
I have checked RX groups and set 380 to promiscuous, double checked slot and color code but still no audio, just the busy light comes on to say its receiving,
I hear my echo audio back through anytone radio but the 380 and Motorola does not.
Any ideas please ?
Kind Regards
Did you ever sort your POG issues out?
I am just about to use my hammer tool on the two versions of boards I have.
Regards
Paul
Sent from my iPhone using Tapatalk