Hi,
I am having the same issue. All perameters for YSF2DMR are set correctly in Config Menu but no receive and no transmit despite all green.
Fusion works perfectly well too. Version 4.1.5. As soon as I change my Startup Host to AmericaLink it works fine.
Bummer
Mary--KM4SIB
YSF2DMR Broken ???
Re: YSF2DMR Broken ???
YSF2DMR ??? You would be using a yaesu c4fm radio.OZ2BKK wrote:Hi all
Does the YSF2DMR work on Pi-Star 4.1.5?
My YSF, YSF XMode, YSF NET and YSF2DMR are all green, but my DMR radio os still very quiet, even with YSR stations displayed on my Pi-Star hotspot display...
What about Colorcode in the YSF2DMR settings?
Bjarke
OZ2BKK
DMR2YSF ??? you would be using a DMR radio.
If you are using YSF2DMR with a DMR radio that would be why the radio is quiet, as the tx rx will be c4fm mode and not DMR.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: YSF2DMR Broken ???
Hello. Running a ZUMspot RPI Nextion 2.4 with Pi-Star 4.1.5.
Recently I am having difficulty connecting from a Yaesu FT3D to DMR, using YSF2DMR. I can connect to YSF Reflectors.
I have my CCS7/DMR ID entered. I have tried BM_3102 and 3104. I have my Hotspot Security number entered, and DMR TG 00091 (Want to connect to World-wide).
I have been able to connect several times in the past without difficulty. Yesterday I did get it working for the day after shutting the YSF2DMR switch off and on again in the Configuration page.
Today I am unable to connect to TG91. I get the voice message "Disconnect" when I attempt to connect.
Is anyone able to provide me with more trouble shooting suggestions?
K2MTB
Recently I am having difficulty connecting from a Yaesu FT3D to DMR, using YSF2DMR. I can connect to YSF Reflectors.
I have my CCS7/DMR ID entered. I have tried BM_3102 and 3104. I have my Hotspot Security number entered, and DMR TG 00091 (Want to connect to World-wide).
I have been able to connect several times in the past without difficulty. Yesterday I did get it working for the day after shutting the YSF2DMR switch off and on again in the Configuration page.
Today I am unable to connect to TG91. I get the voice message "Disconnect" when I attempt to connect.
Is anyone able to provide me with more trouble shooting suggestions?
K2MTB
Re: YSF2DMR Broken ???
The fact it works with ysf reflectors and you get a voice prompt back from the server tells me its working and the issue is most prob. server side.
Switch ur server, check your hotspot security passcode in ur selfcare acc.
Re-enter it there and also in the pistar config.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Switch ur server, check your hotspot security passcode in ur selfcare acc.
Re-enter it there and also in the pistar config.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: YSF2DMR Broken ???
Andrew,
Thanks for your reply.
1. I have verified that all still works well with YSF Reflectors. No problem with any YSF reflectors.
2. I have gone into my self-care and reentered the Hotspot Security Password.
3. I have gone into Pi-Star configuration and re-entered the Hotspot Security Password.
4. I have changed the DMR Master a few times, switching between BM_3102, 3103 and 3104.
When you say, switch your server are you referring to the DMR Master?
Would any other information from me be helpful? Any screen shots?
My "Modes Enabled" show green for YSF and YSF XMode
My "Network Status" show green for YSF Net and YSF2DMR
I know there is activity on TG91 by listening on hoseline.
Again, when I attempt to connect YSF2DMR I get "UNLINK"
K2MTB, Michael
Thanks for your reply.
1. I have verified that all still works well with YSF Reflectors. No problem with any YSF reflectors.
2. I have gone into my self-care and reentered the Hotspot Security Password.
3. I have gone into Pi-Star configuration and re-entered the Hotspot Security Password.
4. I have changed the DMR Master a few times, switching between BM_3102, 3103 and 3104.
When you say, switch your server are you referring to the DMR Master?
Would any other information from me be helpful? Any screen shots?
My "Modes Enabled" show green for YSF and YSF XMode
My "Network Status" show green for YSF Net and YSF2DMR
I know there is activity on TG91 by listening on hoseline.
Again, when I attempt to connect YSF2DMR I get "UNLINK"
K2MTB, Michael
Re: YSF2DMR Broken ???
Yes. master is simply a server.K2MTB wrote:Andrew,
Thanks for your reply.
When you say, switch your server are you referring to the DMR Master?
Would any other information from me be helpful? Any screen shots?
K2MTB, Michael
Maybe post the output of your logfiles
A copy paste of whats being reported in pistar live logs from within the expert pages.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: YSF2DMR Broken ???
In previous firmware versions, when activated on FT5, the YSF2DMR connected directly to the TG preset by me. Now I receive an UNLINK on the radio, I have to exit the connection with the hotspot and resume the X button, it never connects to the TG91 and I have to manually ask to go to the TG that interests me. To return from YSF2DMR to YSF I have to hold down BAND, disconnect and reconnect with the X key, otherwise it doesn't work. With the previous firmware I could make the switches between the various networks without having to disconnect them every time to re-enter the YSF.
Inviato dal mio M2101K6G utilizzando Tapatalk
Inviato dal mio M2101K6G utilizzando Tapatalk