Hi all
Can anyone confirm, if using TK8180 Kenwood UHF radios for a MMDVM repeater build will power up and operate without their front head display assemblies? I will have the yellow wire attached to 12 volts positive to sense power and power up.
Or do these units need the front assemble connected for use.
I know with the Motorola GM 350’s you can remove the front display assemble and these will operate ok.
Regards
Paul
Sent from my iPhone using Tapatalk
Kenwood TK-8180 UHF radio’s for MMDVM repeater use
Re: Kenwood TK-8180 UHF radio’s for MMDVM repeater use
I have a repeater utilizing two 8180's connected to a DVM, and its a great setup. Not sure about the front panel though. If you're worried about people messing with them, try disabling the buttons in the software.