PDODIB Display Works, but not other screens

All things relating to the Nextion Screen(s)
Post Reply
KY6O
Posts: 10
Joined: Mon Apr 18, 2022 9:54 pm

PDODIB Display Works, but not other screens

Post by KY6O »

I have a Nextion enhanced 4.3" NX4827K043, connected via a TTL to USB adapter for my JumboSpot clone, using the ON7LDS-3 driver. The software works, I can see my call and node ID, frequency, etc. But when my hotspot is connected to a TG, the display doesn't update. No BER, no LH, etc. I'm only seeing the splash screen and the primary DMR display screen. Am I missing a step? Can someone please point me in the right direction, or recommend a "better" HMI screen?

Thanks!
KY6O (New to this whole Nextion world)
KI5NYZ
Posts: 5
Joined: Sun Apr 03, 2022 10:03 pm
Location: Welch, Tx

Re: PDODIB Display Works, but not other screens

Post by KI5NYZ »

In the configuration page, is the display listed as: Type: Nextion, Port: /dev/tty/NextionDriver?
KY6O
Posts: 10
Joined: Mon Apr 18, 2022 9:54 pm

Re: PDODIB Display Works, but not other screens

Post by KY6O »

It wasn't changing (In spite of multiple reboots), but it is now, and everything appears to be working. Thanks! :)
Post Reply