MMDVM Dual BM & DMR+ one hotspot?

MMDVM_HS Hat hardware
Post Reply
Posts: 12
Joined: Wed Apr 11, 2018 1:21 pm

MMDVM Dual BM & DMR+ one hotspot?

Post by G0FEA »

Sorry if this has been asked before but I cannot find it in the past questions. Is it possible to configure a MMDVM dual TS hat for both DMR+ (UK Phoenix) and Brandmeister? If so can they continue to use TS1 and TS2 ? If someone is able to direct me in the right direction if this is possible I would be very grateful.

73 Keith
Pi-Star Team
Posts: 1301
Joined: Thu Apr 05, 2018 5:30 am

Re: MMDVM Dual BM & DMR+ one hotspot?

Post by M1DNS »

Dmrgateway allows you to do this.
By adding a 6 (xlx) or 8 (dmr+) infront of the needed Tg will route you to different networks. Leaving the std Tg entry (no additional no added) route to BM

Else you have this breakdown which goes to better explain what you can add to fulfill what you need...

Alt. If you'd rather, theres a video Craig W1MSG covered whilst he was running a series of official pistar how to videos on his YT channel.

Sent via smoke signals from my SM-G935F M1DNS (Admin)

Andrew M1DNS.
Pi-star Admin Team.
Post Reply