RPT1 Validation
RPT1 Validation
Is there a way to disable the RPT1 validation with MMDVMHost like there is with DStarRepeater?
Re: RPT1 Validation
No.
'KLX took the decision not to implement the ability to ignore rpt1 & 2 validation when he moved to MMDVM.
My guess. his thoughts are users should know how to correctly setup their radios.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
'KLX took the decision not to implement the ability to ignore rpt1 & 2 validation when he moved to MMDVM.
My guess. his thoughts are users should know how to correctly setup their radios.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: RPT1 Validation
True, but when you setup a simplex hotspot and set you ID-51A+ to a simplex frequency and then find out that Icom will not transmit the RPT1 & 2. I know the trick is to use a dup offset of 000kkHz, but not everyone knows that.
-WA7HTJ
-WA7HTJ
Re: RPT1 Validation
wa7htj wrote: ... to a simplex frequency and then find out that Icom will not transmit the RPT1 & 2.
I know the trick is to use a dup offset of 000kkHz, but not everyone knows that.
-WA7HTJ
Not at first maybe, but if they ask here, on the FB group or Telegram group a 100 users will soon let them know abt it.
Ps. Its in situ as its part of the dstar original protocol as written up by jarl.
Back then there were no alt. but an icom rptr. So it stays true to the reverse engineering of the std.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.