I have this MMDVB board which is the best setting to use as it seems deaf and gives the radio repeater not found message , seems when its in standby it goes deaf , before anyone asks yes all the seeting are correct my BER is around 1-2%
link to picture
https://ibb.co/9c0yDcT
Which Modem to select?
Re: Which Modem to select?
Although it might sound low a BER of 2% is still quite high.
fine tune for better. 0.00 is ur goal but anything -> 0.6 should be usable.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
fine tune for better. 0.00 is ur goal but anything -> 0.6 should be usable.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: Which Modem to select?
That don’t answer the question as to what modem board to select before messing around with the offset serrings
Re: Which Modem to select?
Ok so generally if you select the incorrect modem type you wont hear anything at all with zero output. So given your hearing traffic, you must have guessed the correct one.
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: Which Modem to select?
Or do you mean the radio responds with no rptr found. In which case you might not of.
Look in pistar live logs, whats reported there?
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Look in pistar live logs, whats reported there?
Sent via smoke signals from my SM-G935F M1DNS (Admin)
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.