dmrgateway commands by command line

General support for the Pi-Star System
Post Reply
hb9hrd
Posts: 10
Joined: Wed Jan 18, 2023 11:32 am

dmrgateway commands by command line

Post by hb9hrd »

Hi,
Is there a way to send commands to DMRgateway using command line ?
somethink like "sudo pistar-link unlink" for the dmrgateway

My goal is to change/disconnect XLX Master Module used by DMRgateway (same as sending "64000" private call by RF)

thanks, Julien
AF6VN
Posts: 821
Joined: Fri Jul 20, 2018 1:15 am

Re: dmrgateway commands by command line

Post by AF6VN »

Most of the -link commands, to my knowledge, rely upon an API provided by the server; they don't operate locally. Since DMR seems to support multiple servers with (I presume) incompatible APIs, DMR appears to be the mode that does not provide /any/ -link command capability (the BrandMeister servers support an API, available on the Pi-Star admin page, but even that only supports adding/removing STATIC talkgroups -- not really an "unlink" feature).

--
AF6VN
Dennis L Bieber
M1DNS
Pi-Star Team
Posts: 1386
Joined: Thu Apr 05, 2018 5:30 am

Re: dmrgateway commands by command line

Post by M1DNS »

Call Tg4000 to unlink a BM Tg.

_____________________________

XLX don't afaik, have an API solution to 'talk' to their backend.

So no. Theres not really a way to do this non RF.


Sent via smoke signals from my SM-G935F M1DNS (Admin)


Andrew M1DNS.
Pi-star Admin Team.
hb9hrd
Posts: 10
Joined: Wed Jan 18, 2023 11:32 am

Re: dmrgateway commands by command line

Post by hb9hrd »

Such feature would be quite useful.
Sometimes on simplex repeaters, as users don't allow for some pause before they PTT, it's impossible to unlink and change module. and as the admin console does not allow any action on the dmrgateway either, the only way to disconnect is to reboot pistar.
User education remains a goal ...
Julien
Post Reply