Hi,
Only just recently noticed, (dont monitor NXDN too often), there is no audio coming out of my Icom NXDN radio.
I can TX and link to the various TG's. (50525)
I can see traffic on the dashboard from a connected TG and can head the audio on another linked mode of 50525.
I see my repeater (MMDVM) TXing and the signal is seen on the ICOM display.
Just no audio.
Has there been a recent change to the NXDN side of things?
I also do not hear the "connected to....." from any TG I try to link to.
Rebooted the PI, Radio, Repeater. Still no go.
Thanks for the look in.
Regards
Mark
No audio from NXDN?
Re: No audio from NXDN?
Hi,
I've the same issue on a simplex NXDN node with a BI7JTA MMDVM board on a RPi 3 B : no audio in TX and no PTT led when traffic outgoing from VoIP or from Pi-Star for TG information BUT all information are correctly seen on dashboard.
Any idea ?
Maybe simplex node function is not available in NXDN mode ?
Regards
Damien / F4CZX
I've the same issue on a simplex NXDN node with a BI7JTA MMDVM board on a RPi 3 B : no audio in TX and no PTT led when traffic outgoing from VoIP or from Pi-Star for TG information BUT all information are correctly seen on dashboard.
Any idea ?
Maybe simplex node function is not available in NXDN mode ?
Regards
Damien / F4CZX
Re: No audio from NXDN?
Did you try changing the TX Invert in the Modem section of the MMDVMHOST. Mine is set to "1", or enabled.