Call sign routing on NXDN?

Help with NXDN issues
Post Reply
AK7AN
Posts: 75
Joined: Fri Jun 14, 2019 2:17 am

Call sign routing on NXDN?

Post by AK7AN »

I guess it would be more like ID routing. If I programmed someone else's NXDN ID in to the Unit ID list and set that ID to do an Individual call, would it route to the last place that person's ID was transmitted? Or does NXDN not function that way? I know it works in an RF environment, but does the NX core support it?
Thanks
Ed
AK7AN
M1DNS
Pi-Star Team
Posts: 1388
Joined: Thu Apr 05, 2018 5:30 am

Re: Call sign routing on NXDN?

Post by M1DNS »

Does not work that way. The NXDNgateway was written to connect outbound to a reflector. The gateway has no ability to handle inbound connections.

The only gateway in the whole suite of KLX offerings that has this ability is ircddbgateway, which is used with DSTAR mode

Sent via smoke signals from my SM-G935F M1DNS (Admin)


Andrew M1DNS.
Pi-star Admin Team.
AK7AN
Posts: 75
Joined: Fri Jun 14, 2019 2:17 am

Re: Call sign routing on NXDN?

Post by AK7AN »

M1DNS wrote: Sun Mar 19, 2023 9:44 am
The only gateway in the whole suite of KLX offerings that has this ability is ircddbgateway, which is used with DSTAR mode

Sent via smoke signals from my SM-G935F M1DNS (Admin)
For the life of me I haven't been able to get the call sign routing on DStar to work. I have read and watched YouTube and it just doesn't want to play.
Thanks for the info on NXDN.
73
Ed
AK7AN
Post Reply