Factory Reset via SSH?

[N6MIK]

I restored the wrong configuration file to my ZumSpot running 4.16, and can't get anywhere with the webUI now. Is there a route to the factory reset command via SSH? Thanks!

[G4FDL]

Re-image the SD card will get you back to default then restore the correct backup.

[M1DNS]

Pull ur sd card from the Pi put it in a PC card reader. Drag n drop the correct restore file into the boot section of the sd card. Put the card back into the pi and restart. The restore file should load in on startup.

Sent via smoke signals from my SM-G935F M1DNS (Admin)