Generic NanoPi NEO MMDVM

[KF0AFW]

This is what I have https://a.co/d/0BeRZuJ

It’s the second one that stopped working. I have rebooted, removed power and even reflashed. Ethernet port lights are both solid on. SVC red LED is flashing. Both hotspots have ended their lives this way.

Before I did all of the rebooting the hotspot never worked correctly. Sometimes I could key to it, sometimes I could not. It would show traffic on the screen but that was it. It never did relay audio to either of my radios.

I am new to all of this DMR and Hotspot stuff.

Thanks in advance for any input!

UPDATE: I have reflashed with the oldest v3.x.xx non AIR and was able to boot to pi-star dashboard. Pi-star is configured I am unable to TX/RX using my hotspot now.

[DF1KZ]

Please check the frequency -offset. The TX/RX-frequencies can deviate by several 100Hz, your hotspot may work but you hear nothing.