Hi all,
Have tried to use the MMDVM hat flash command to upgrade hat firmware but I can't get it to work.
Have tried on 4.2.1 and 4.3.0 using the command that I've used loads of times. sudo pistar-mmdvmhshatflash hs_hat
On each version below is what I get:
Welcome to Pi-Star: v4.3.0
Last login: Wed Mar 20 20:20:56 2024 from 192.168.0.134
pi-star@pi-star(ro):~$ sudo pistar-mmdvmhshatflash hs_hat
sudo: pistar-mmdvmhshatflash: command not found
pi-star@pi-star(ro):~
Any advice is appreciated.
Cheers Glenn VK4NGA
MMDVM Hat flash not working
Re: MMDVM Hat flash not working
Issue this command instead and go from there:
Code: Select all
sudo pistar-modemupgrade
Re: MMDVM Hat flash not working
Check the expert page. the firmware update (FW) for hotspot boards is now actioned via the dashboard GUI.
.../admin/expert/modem_fw_upgrade.php
Sent via smoke signals using my SM-G935F
.../admin/expert/modem_fw_upgrade.php
Sent via smoke signals using my SM-G935F
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.
Re: MMDVM Hat flash not working
Thanks Guys, I can't believe I missed that!
Cheers
Cheers
Re: MMDVM Hat flash not working
Cool, getting to that page when adding the last part to the web address, but I couldn't find it in the listed menues...
Maybe it's too late
Thanks and kind regards from Germany
Thorsten, DH4FT
Re: MMDVM Hat flash not working
Depending on the release of pistar ur running. The page got added in 4.1.8DH4FT wrote:
Cool, getting to that page when adding the last part to the web address, but I couldn't find it in the listed menues...
Maybe it's too late
Thanks and kind regards from Germany
Thorsten, DH4FT
Not sure if the earlier release got pre-dated with the firmware update page. They might still be using the cli to update.
Sent via smoke signals using my SM-G935F
Andrew M1DNS.
Pi-star Admin Team.
Pi-star Admin Team.