Zum nextion kit screen replacement

Help and support for ZUMSpot Hardware
Post Reply
KF0AWL
Posts: 25
Joined: Tue Jun 25, 2024 7:18 pm

Zum nextion kit screen replacement

Post by KF0AWL »

I have a Zumspot RPi Nextion 3.5 that the screen got damaged and I have to replace.
I got a screen but forgot to take a photo of what color wire goes to what pin on the back of the zumboard. If anyone can help I would be forever grateful!
M1DNS
Pi-Star Team
Posts: 1429
Joined: Thu Apr 05, 2018 5:30 am

Re: Zum nextion kit screen replacement

Post by M1DNS »

The pins are usually labled power n ground should be set pin to pin.

Tx data on the screen goes to rx data on the board and vis versa tx on the board goes to rx on the screen.



Sent via smoke signals using my SM-G935F

Andrew M1DNS.
Pi-star Admin Team.
Post Reply