Pi-Star Hytera Behaviour

Help with DMR issues
Post Reply
DL5OCR
Posts: 3
Joined: Sat Dec 24, 2022 7:48 am

Pi-Star Hytera Behaviour

Post by DL5OCR »

Hello, i am new Pi-Star user and i have a question regarding using pi-star hotspot und hytera dmr TRX. I use a dual hotspot. everything is working fine with my GD-88 handheld. But with my hytera mobile i have a strange behaviour. The hytera has a "Call End" Popup-Dialog after end of transmission (hytera owners should know what i mean :) )...Working over a "normal" repeater: Hytera is working ok, display is toggling between the DMR-IDs from the talking guys, and the call end dialog comes only after QSO is done or the repeater timeout is elapsed ( 7 seconds or more). But if i listen to the same TG via my hotspot (brandmeister network), receiving each transmission is fine, but betwenn every change from incoming transmission, i have the Call-End-Dialog-Popup. It is not a topic from TXHang, i set this to 10sec, and the hotspot is still in tx mode. Does anybody have an idea? Thanks...;)
OM5HAM
Posts: 2
Joined: Sat Nov 02, 2024 7:29 am

Re: Pi-Star Hytera Behaviour

Post by OM5HAM »

Hi @DL5OCR, has your problem been solved? I have the same issue with my Hytera HP685.
OM5HAM
Posts: 2
Joined: Sat Nov 02, 2024 7:29 am

Re: Pi-Star Hytera Behaviour

Post by OM5HAM »

For simplex channels, enable "Pseudo Trunk" instead of a designated slot (TG1 or TG2). Finally it is tested and works on my Hytera HP685 with Pi-star hotspot.
Post Reply