Firmware upgrading from v1.4.7 to v1.4.8

Help and support for ZUMSpot Hardware
waynedc
Posts: 7
Joined: Sat Apr 14, 2018 1:42 am

Re: Firmware upgrading from v1.4.7 to v1.4.8

Post by waynedc »

I was able to resolve this issue and I appreciate all the input and assistance. I created another Pi-Star SD card but this time I did not restore my backup settings file. Other than setting up the WiFi, I updated, upgraded, and update the firmware with no issues. I restored my settings manually and everything is working as it should.

There must have been something in my settings and the Pi-Star created a backup file that was preventing the firmware update on my original SD card and one I created and then used the settings restore on.

If anyone has input on what setting might prevent firmware updates or cause the error message I was receiving, I would be interested in knowing.

73,
Wayne
N7ZQS
n0xlf
Posts: 11
Joined: Mon Jul 16, 2018 1:03 am

Re: Firmware upgrading from v1.4.7 to v1.4.8

Post by n0xlf »

I experienced this same thing and momentarily disabling the screen under "MMDVM Display Type" solved it. I'm guessing because the screen is using the same serial port as the firmware update...
Post Reply