Hi,
I have here a Raspberry Pi 2 with a Tontec Touchscreen. Is it possible to use this screen instaed of the OLED for Pi Star?
It is this one:
https://www.amazon.co.uk/Tontec-Raspber ... B00OFLKPG4
These Pins are used on Raspi by the Screen:
3.3v 1 # . 2
3 . . 4
5 . # 6 ground
[cs] 7 # . 8
9 . . 10
[wr] 11 # # 12 [rs]
13 . . 14
[d1] 15 # # 16 [d2]
17 . # 18 [d3]
[d4] 19 # . 20
[d6] 21 # # 22 [d5]
[d7] 23 # # 24 [d8]
25 . # 26 [rst]
73 de Peter, DG7AA aka PA7PF
Raspberry Pi 2 with Tontec Touchscreen
Re: Raspberry Pi 2 with Tontec Touchscreen
By looking at the pictures in the 'ad' I would have to say no, as many of the pins you need are taken up by the MMDVM or Jumbo or Zum or whatever boards. I am no expert and you can certainly try but on visual from details given, no.
Hardware gurus, prove me wrong.
Hardware gurus, prove me wrong.
I am no developer, guru, expert, nor do I claim to be or want to be. All advice I give is purely from experience and my efforts to help others.
W1KMC - Kevin M Carman
Bangor, ME
Jumbospot on a Pi0W
DMR 3123142 & 3123143
HHUS Trunk Ext 4329
W1KMC - Kevin M Carman
Bangor, ME
Jumbospot on a Pi0W
DMR 3123142 & 3123143
HHUS Trunk Ext 4329