Is the RPi image suitable for both the RPi 3 and the Zero Wireless, or is there a specific version for the Zero?
Appreciate the assist.
What image is best for Zero Wireless?
Re: What image is best for Zero Wireless?
The “RPI_V3.4.16....” image is the only one that will run on the Pi Zero and Zero W. It runs on all versions of authentic Pi boards except the Pi3B+.If you have the latter board there’s a beta version of Pi-Star that apparently works fine on it. Find it at http://www.pistar.uk/beta/. If you have the older Pi3B (not the 3BPlus), then the “RPI_V3.4.16...” image is the one for it.
Last edited by WU0V on Wed Nov 07, 2018 1:53 pm, edited 1 time in total.
Re: What image is best for Zero Wireless?
The Pi-Star beta image for the RPi 3B+ is available at http://www.pistar.uk/beta/
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm