Hi,
Is it possible to have ALL the parameters documented?
I mean, What does each one & What are the accepted values.
Type:
??
Brightness:
Never mind the value, 0, 1, 16, 125, 192, 250... It seems to do nothing.
Invert:
Display information video format
0= Light text on dark background.
1= Dark text on light background.
Other values, have no effect.
Scroll:
Mode label when active scrolls:
0= No
1= Yes
Other values, have no effect.
Rotate:
Information showing "upside-down"
0= Info staring "left short" edge
1= Info endind "left short" edge
Other values, have no effect.
Cast:
??
Does someone have more information ??
It would be good to have it documented.
Thanks,
Rafa.
OLED section parameters documentation
OLED section parameters documentation
73'Rafael.
EA3BIL
JN11an
EA3BIL
JN11an
Re: OLED section parameters documentation
Hi @ll,
Any updates on this??
Is there really NOBODY having a single word to add ???
.
Any updates on this??
Is there really NOBODY having a single word to add ???
.
73'Rafael.
EA3BIL
JN11an
EA3BIL
JN11an
Re: OLED section parameters documentation
These are the ones I know about:
- Set OLED Type: 3 = 0.96″ or 6 = 1.3″. After applying changes, reboot Pi-Star.
- Change rotation: Rotate = 0 or 1.
- Invert background: 0 = white text on black background or 1 = black text on white background.
- Change brightness: 10 = bright or 0 = less bright (effect varies by modem board).
- Thanks to Scott, VK7HSE, for this one: If your OLED display has garbled text, check your Display Level in the Expert Editor > MMDVMHost > Log section. It must be set to 0.
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Re: OLED section parameters documentation
Hi Toshen,
Thanks for the input !!!
There's still a "misterious" one:
Cast
Any info about it ??
Thanks for the input !!!
There's still a "misterious" one:
Cast
Any info about it ??
73'Rafael.
EA3BIL
JN11an
EA3BIL
JN11an
Re: OLED section parameters documentation
Oky...
Let's summarize as follows:
Type:
3 = 0.96″ or
6 = 1.3″
After applying changes, rebooting Pi-Star is needed.
Brightness:
10 = brightest to
0 = less bright (effect varies by modem board)
Invert:
Display information video format
0= Light text on dark background. or
1= Dark text on light background.
Other values, have no effect.
Scroll:
Mode label scrolls when active:
0= No or
1= Yes
Other values, have no effect.
Rotate:
Information showing "upside-down"
0= Info staring "left short" edge or
1= Info endind "left short" edge
Other values, have no effect.
Cast:
It appears to no longer be a valid setting in the configuration as of May 10 2018.
See: https://github.com/g4klx/MMDVMHost/comm ... 0993cb233b
Let's summarize as follows:
Type:
3 = 0.96″ or
6 = 1.3″
After applying changes, rebooting Pi-Star is needed.
Brightness:
10 = brightest to
0 = less bright (effect varies by modem board)
Invert:
Display information video format
0= Light text on dark background. or
1= Dark text on light background.
Other values, have no effect.
Scroll:
Mode label scrolls when active:
0= No or
1= Yes
Other values, have no effect.
Rotate:
Information showing "upside-down"
0= Info staring "left short" edge or
1= Info endind "left short" edge
Other values, have no effect.
Cast:
It appears to no longer be a valid setting in the configuration as of May 10 2018.
See: https://github.com/g4klx/MMDVMHost/comm ... 0993cb233b
73'Rafael.
EA3BIL
JN11an
EA3BIL
JN11an