As usual, uncomment the commented commands to enable them, you may want to un-link from any connected reflector when playing with GETIP and 8BALL on D-Star
GETIP will answer with a text message of the host IP address, and 8BALL will answer yes/no questions as per the infamous Magic 8Ball.
HOSTFILE (and the respective options per mode) will update the host files, but does not re-start the services afterwards, enables you to get new host files via RF command, its not terribly handy, but who knows, it might help one of you.
Config now looks like:
Code: Select all
[banner]
# Pi-Star Remote config file
# This config file is desiged for the Pi-Star Keeper remote control
# The remote control system is designed to give repeater keepers an
# RF KillSwitch for their repeaters.
[enable]
# Is the Pi-Star Remote Enabled? (true|false)
enabled=false
[keeper]
# Keepers Information
callsign=M1ABC
[d-star]
# UR fields
svckill=SVCKILL
svcrestart=SVCRSTRT
reboot=REBOOTPI
#shutdown=SHUTDOWN
getip=GETIP
#hostfiles=HOSTFILE
#8Ball=8BALL
[dmr]
# TG commands
svckill=9999999
svcrestart=9999998
reboot=9999997
#shutdown=9999996
#hostfiles=9999995
[ysf]
# ROOM commands
svckill=99999
svcrestart=99998
reboot=99997
#shutdown=99996
#hostfiles=99995
[p25]
# P25 Talkgroups are limited to 1->65535
svckill=65531
svcrestart=65532
reboot=65533
#shutdown=65534
#hostfiles=65530