STM32-dvm sending a tone

Help with other MMDVM Repeater Boards (with NO onboard RF)
Post Reply
SA5BUM
Posts: 2
Joined: Wed May 23, 2018 9:20 pm

STM32-dvm sending a tone

Post by SA5BUM »

Has anyone run in that after a while underTX that the radio
Start to put out a tone that runs for 30sek- to 1min. Like
Timeout or so?
Am using. PiStar v4x whit raspberry pi3, the radio is
Motorola GM340?
I have try to change timeout under expert config but with same result ?

Cheers Christian/SA5BUM
SA5BUM
Posts: 2
Joined: Wed May 23, 2018 9:20 pm

Re: STM32-dvm sending a tone

Post by SA5BUM »

This issue is now solved!!
It was the GM340 that had a TX timer active so after 4.25min it sends a tone. Just had to upload a new code plug with the
change Disable timers under personal settings.


Cheers /Christian SA5BUM
Post Reply