Hi Guys, trying to set up a DVRPT V1 with Pi star
Running RPi B
Kenwood TM-D710 as the host radio
Was using Western D-Star Jessie really successfully I did have to set the modulation very high with the kenwood, as opposed to an Icom IC208 but It worked fine. Now I have reflashed the card to Pi-Star having all manner of issues
Im pretty sure the gateway is functioning well, as the admin is logging activity well, and I see myself logged into the reflectors, however I see the signal on my ID-51, full scale, but no audio, the Kenwood is recieving my audio full scale but no local activity on the Pi-star dashboard
I checked the ID51 set up 144.825, -Dup, 0.000 offset DV should work as it did with jessie, nothing changed.
So my question is can anyone give me any pointers about modulation and TX or RX inversion ???
Please emal direct at [email protected]
Thanks in anticipation....
DVRPTR V1 RPi B and Kenwood
DVR-PTR V1, V2 and V3 Support
Jump to
- Pi-Star Information
- ↳ Announcements
- ↳ Feature Requests
- ↳ FAQ
- Software Support
- ↳ Pi-Star General Support
- ↳ WiFi Setup
- ↳ IP Networking
- ↳ D-Star Specific Support
- ↳ DMR Specific Support
- ↳ YSF Specific Support
- ↳ P25 Specific Support
- ↳ NXDN Specific Support
- ↳ POCSAG Specific Support
- Hardware Support
- ↳ Raspberry Pi Foundation Hardware
- ↳ Friendly Arm Nano Pi Neo / Neo Air
- ↳ Hardkernel Odroid XU3 / XU4
- ↳ Orange Pi Zero
- ↳ Nextion Screens
- ↳ OLED Screens
- ↳ ZUMSpot (Hat / Libre / USB)
- ↳ MMDVM_HS Hat(s)
- ↳ DV-Mega Hat(s)
- ↳ DV-Mega GMSK Arduino
- ↳ DVAP Dongle
- ↳ DVR-PTR V1 V2 V3
- ↳ Other MMDVM Modem Boards
- ↳ Other All-in-one Boards with included RF
- ↳ Radio Equipment
- Repeater Keepers
- ↳ Software Support
- ↳ Hardware Support
- ↳ Everything Else
- Tutorials
- ↳ W1MSG Video Tutorials
- ↳ User Submitted Video Tutorials
- ↳ Tips and Tricks
- General Conversation
- ↳ Share your stuff
- ↳ I'm new here
- ↳ CQ CQ CQ
- ↳ I need to vent
- ↳ The Bar