On a D74:
- Long-press D-pad UP (bring up destination selectmenu)
- D-pad DOWN to reflector, press ent
- D-pad to link to reflector, press ent
- IF you've previously used the reflector, you should be able to D-pad UP/DOWN to the desired one, press ent
- IF it is not in the list, press input (dual - A/B button)
- D-pad UP/DOWN to cycle REF/XRF/DCS; D-pad RIGHT, D-pad UP/DOWN to enter select the 3 digit number; D-pad RIGHT, D-pad UP/DOWN to select module letter; press ent
LINK REFLECTOR
reflector command
Press PTT (when the hotspot is "listening"). This should activate the reflector through the hotspot.
- Long-press D-pad UP (bring up destination selectmenu)
- D-pad DOWN to reflector, press ent
- D-pad to use reflector, press ent
USE REFLECTOR
CQCQCQ
You are done.
It actually goes much easier than it reads above.
I strongly recommend owners of the D74 download the so-called "in-depth manual" from Kenwood. It is essentially two essays focusing on the APRS and D-Star usage of the radio (unlike the 590SG IDM which has lots of technical details for that radio)
https://www.kenwood.com/i/products/info ... nload.html
https://www.kenwood.com/i/products/info ... AE_IDM.pdf