OLED screen mostly grey after Factory Reset

All things relating to OLED Screen(s)
Post Reply
G4AUR
Posts: 1
Joined: Fri Jul 05, 2019 11:08 pm

OLED screen mostly grey after Factory Reset

Post by G4AUR »

Just in case anyone else has this problem. After a factory reset of a Zumspot with a 1.3" OLED screen, most of the screen went grey and just one line at the top showed any information. This turned out to be the OLED TYPE under the Expert Config menu having been reset to 3 from 6 by the Factory Reset. So if your screen goes mostly grey check out the OLED TYPE parameter - for a 1.3" screen it should be 6.
User avatar
KE0FHS
Posts: 1122
Joined: Wed Apr 11, 2018 8:40 pm
Location: Colorado, USA
Contact:

Re: OLED screen mostly grey after Factory Reset

Post by KE0FHS »

I wonder if that setting would get restored if you did a backup before the factory reset, and then restored from that backup?
73, Toshen, KE0FHS
Playing with Pi-Star (unofficial notes about setting up and using Pi-Star):
https://amateurradionotes.com/pi-star.htm
Post Reply