Hi,
My jumbospot works fine on DSTAR with my Icom ID51A Plus, but when I use it on YSF with my Yaesu FT70DR, I can hear other's traffic (their call signs are also shown on my FT70DR's screen), but I can't transmit on my Jumbospot. My RF transmission is not shown on the dashboard at all. I tested my FT70DR and it has no problem. There must be something wrong with the setting. Is it related to the RX offset setting?
Please advise.
Not able to Transmit with my FT70DR
Re: Not able to Transmit with my FT70DR
If your hotspot is set to Private more (general settings in the config page) the callsign in the radio MUST match the repeater exactly.
Re: Not able to Transmit with my FT70DR
Possible solution:
These exact symptoms occur if the FT-70DR is not transmitting in simplex to a hotspot (Zumspot in my case). Check the radio for simplex operation with the F-0 key sequence. Make sure the setting value is "SIMP". (Pi-Star on the hotspot also should be in simplex.)
This stopped my hair pulling.
These exact symptoms occur if the FT-70DR is not transmitting in simplex to a hotspot (Zumspot in my case). Check the radio for simplex operation with the F-0 key sequence. Make sure the setting value is "SIMP". (Pi-Star on the hotspot also should be in simplex.)
This stopped my hair pulling.
Re: Not able to Transmit with my FT70DR
I to haveing same problem ft 70 d not connecting to me hotspot on ysf my 991 works great in Rx and tx but handheld only receive I will look at setting to
Re: Not able to Transmit with my FT70DR
Menu 61 W/N.DEV
check settings must be WIDE.
check settings must be WIDE.
Re: Not able to Transmit with my FT70DR
DH2GCH
THANKS- after hours of "troubleshooting" changed the setting to WIDE, and now it works. Have no idea how it got changed...
NiFRJ
THANKS- after hours of "troubleshooting" changed the setting to WIDE, and now it works. Have no idea how it got changed...
NiFRJ
Re: Not able to Transmit with my FT70DR
Same trouble here.
Set the FT70D to wide deviation and simplex under configuration callsign same as a repeater also set to private.
Still No joy still unable to transmit?
John G4YDM
Set the FT70D to wide deviation and simplex under configuration callsign same as a repeater also set to private.
Still No joy still unable to transmit?
John G4YDM