YSF Revert

Help with YSF / Fusion issues
Post Reply
n1tvi
Posts: 1
Joined: Fri Jan 11, 2019 2:23 pm

YSF Revert

Post by n1tvi » Sat Jan 12, 2019 3:37 pm

Hello,

Is anyone esle have issues with the YSF Revert on there hotspot/RPT?

I have a hotspot and a RPT running on Pi-Star dual mode P25/YSF.

I have a local reflector I would like my RPT to sit on when it is idle. I have the "1" on in the revert it works sometimes and sometimes not.

Works fine on P25 with some code changes. Any one else have this issue or an idea? And yes, I have the latest Pi-star image and updated MMDVM FW.

Here is my RPT dash board: www.n1tvi.net:8081

Thanks and 73

Nick, N1TVI

AK2L
Posts: 4
Joined: Wed Apr 11, 2018 3:07 pm

Re: YSF Revert

Post by AK2L » Thu May 23, 2019 9:09 pm

Just saw your post. Revert works for me *IF* I specify a YSF room as depicted here:

https://www.dropbox.com/s/ezs3yv4ewgu80 ... m.png?dl=0

However, if I specify an FCS room such as "FCS00204", it does not.

I am hoping someone can explain how this feature is supposed to work and why only one of the room types does work.

73 de David, AK2L

MW0MWZ
Site Admin
Posts: 767
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: YSF Revert

Post by MW0MWZ » Fri May 24, 2019 5:43 pm

Timeout/Revert were getting ripped out by the config page, but not any more - cured that one for you today, so now they stay put.

Tested both FCS and YSF for the revert, both working like they should for me.

Also working on a modification for YSFGateway to announce where it connected via WiresX on service start - I bet almost nobody needs that, but personally I like it.
Andy

73 de MW0MWZ
http://pistar.uk

AK2L
Posts: 4
Joined: Wed Apr 11, 2018 3:07 pm

Re: YSF Revert

Post by AK2L » Fri May 24, 2019 5:50 pm

Thank you Andy.

Will that fix be in 3.4.x or only in 4.x?

MW0MWZ
Site Admin
Posts: 767
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: YSF Revert

Post by MW0MWZ » Sat May 25, 2019 5:45 pm

Both :)
Andy

73 de MW0MWZ
http://pistar.uk

Post Reply