Page 1 of 1
Wifi mynanodv (combitronics)
Posted: Fri Feb 08, 2019 9:34 am
by f5odp
Hi everybody, I need some help, please. I read all about wifi on the wiki & "playing with pistar" notes /wifi point 4.... but nothing works...
I have a mynanodv (combitronics) with a wifi dongle (802.11n) sold by combitronics too. I burnt an sd card with the last nanopistar : Pi-Star_NanoPi_V3.4.17_09-Jan-2019.zip , put the compliant wifi file as said on tutos, ... (ssid and pwd done with pistar tool : ok.. ) , started the hotspot... but nothing, nothing, nothing... no connection on wifi net,... and after 5, 10 20 minutes, no auto-ap ... if I connect with cable (rj45), the wifi option on dashboard is ok, but says : "interface is download" ! How can I do to start this interface ? What am I doing wrong ? Any help will be welcome ! Tks in advance !
Re: Wifi mynanodv (combitronics)
Posted: Fri Feb 08, 2019 4:06 pm
by KE0FHS
If I were in your shoes, there are two things I would try next:
Auto AP probably won't work. I'm pretty sure that feature is limited to new versions of the Raspberry Pi (Zero W, 3B, 3B+, 3A+).
Re: Wifi mynanodv (combitronics)
Posted: Fri Feb 08, 2019 7:16 pm
by f5odp
Many tanks for your answer !
Ok for the "original" image from Combitronics.
Just one thing please,... could you tell me how can I startup the interface ? What is the command line from Shell ?
Many thanks again for your help .
Re: Wifi mynanodv (combitronics)
Posted: Fri Feb 08, 2019 8:12 pm
by KE0FHS
f5odp wrote: ↑Fri Feb 08, 2019 7:16 pm
Just one thing please,... could you tell me how can I startup the interface ? What is the command line from Shell ?
In a browser that is connected to the same network as the hotspot, type either:
http://pi-star/
or
http://pi-star.local/
That will open the Pi-Star dashboard where you can finish setting up Pi-Star.
Re: Wifi mynanodv (combitronics)
Posted: Sat Feb 09, 2019 8:43 am
by f5odp
Thank you for your answer !
Yes, I already donne that (via rj45...) many times
but the problem is that the wifi interface (wlan0...) stays always "down" and never "starts" !
in fact, that is the problem ! How to start the wifi interface...?
The wifi dongle is detected ; the wifi dashboard is on.. but the interface wlan is down... the interface is not mounted automatically on boot... I think I need to "manually" mount it ... but I dont know how to do it with the pistar soft...
Thanks in advance for your help
Re: Wifi mynanodv (combitronics)
Posted: Sat Feb 09, 2019 2:15 pm
by KE0FHS
f5odp wrote: ↑Sat Feb 09, 2019 8:43 am
I think I need to "manually" mount it ... but I dont know how to do it with the pistar soft...
No, you don't need to manually mount it. I'm guessing you're facing an issue with how your router is configured. Because of all the different network setups and routers, this is a tricky area to troubleshoot, but if Pi-Star isn't connecting to your WiFi network, here are some things to look at:
- Double check that you entered the network name and password correctly in Pi-Star. Typos happen!
- A space in the network name can cause problems connecting to some routers.
- Some radio/modem boards require the WPA or WPA2 security standard, and won't work with WEP.
- Make sure your wireless network doesn't have "Wireless Isolation" enabled, which could prevent your computer and hotspot from communicating with each other.
- Might help to reboot your router, too.
- Oh, and also avoid frequencies used for other purposes, for example, 435.0 - 438.0 and 145.8 - 146.0, used internationally for satellite communication
Re: Wifi mynanodv (combitronics)
Posted: Sat Feb 09, 2019 9:51 pm
by AF6VN
Do you have a CAT 5 cable connection at the time?
I vaguely recall my RPi-3 only brings up the WiFi when I do NOT have a CAT 5 cable connection.
Re: Wifi mynanodv (combitronics)
Posted: Wed Feb 27, 2019 12:12 pm
by f5odp
KE0FHS wrote: ↑Sat Feb 09, 2019 2:15 pm
f5odp wrote: ↑Sat Feb 09, 2019 8:43 am
No, you don't need to manually mount it.
In fact,..yes ! You need to do it with a Dvmega from Combitronics ...
If you try with the original pistar version, wifi don't work...
I donwload the same version of pistar from combitronics site, and wifi works nice at the 1rst startup.
This means that Combitronics add a driver to the "original" version in the boot section... !!
Conclusion : for Mynanodv from Combitronics, if you need wifi, you must download the Combitronic version of pistar... or you need to add manually a driver in the boot section of the "original" version ...
73's
Xavier