Hi, I have , some how, the same issue!!
I have wired the LCD display according to the information retried from this site:
https://github.com/g4klx/MMDVMHost/blob ... ME.HD44780
I'm running a new clean installation of Pi-Star on a Raspberry Pi2B+ with DVmega single band (UHF) pi-hat.
After I had done all the updates/upgrades, the hotspot it running 100%.
I would like to add one LCD 16X2, 20X4 or 40X2. I have some of those in stock, I would like to give the some use!!
Now, In Ssh I can't compile the "programe"
make clean Output
pi-star@pi-star(ro):~$ rpi-rw
pi-star@pi-star(rw):~$ sudo make clean
make: *** No rule to make target 'clean'. Stop.
pi-star@pi-star(rw):~$
make -f Makefile.Pi.HD44780 output
pi-star@pi-star(rw):~$ sudo make -f Makefile.Pi.HD44780
make: Makefile.Pi.HD44780: No such file or directory
make: *** No rule to make target 'Makefile.Pi.HD44780'. Stop.
pi-star@pi-star(rw):~$
additional info:
pi-star@pi-star(rw):~$ gpio -v
gpio version: 2.52
Copyright (c) 2012-2018 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty
Raspberry Pi Details:
Type: Pi 2, Revision: 01, Memory: 1024MB, Maker: Sony
* Device tree is enabled.
*--> Raspberry Pi 2 Model B Rev 1.1
* This Raspberry Pi supports user-level GPIO access.
pi-star@pi-star(rw):~$
any help is appreciated!!
Best regard
Jose Alves
CT1FHW