wifi password

General support for the Pi-Star System
Post Reply
Posts: 3
Joined: Sun Mar 24, 2019 8:25 pm

wifi password

Post by w2eck » Tue May 14, 2019 1:38 pm

Running Rasp Pi 3 with Pi-Star 3.4.17. "Pi-Star" shows up on a wifi sig scan, but can't sign into it because don't have correct password. Can someone tell me where in Pi-Star config, I find the password or change it?

73 Paul w2eck

Posts: 143
Joined: Fri Jul 20, 2018 1:15 am

Re: wifi password

Post by AF6VN » Tue May 14, 2019 3:24 pm

Are you sure that is not "pi-star setup"?

Normally a configured unit will be a WiFi client and connects to a router, and you access it via the router. The only time you would connect to it as an access point is if it does not discover an Internet connection (ie; WiFi connection is not configured, and no Ethernet cable connects the unit to a router) -- and if it goes into access point mode, the WiFi SSID is "pi-star setup" (or similar).

In that mode, the password is, I believe, the same one you use to SSH into a running unit (default: raspberry). I've never used the access point configuration -- I find it much easier to just run a cable from my router direct to the unit.

Dennis L Bieber

Posts: 344
Joined: Thu Apr 05, 2018 5:30 am

Re: wifi password

Post by M1DNS » Tue May 14, 2019 5:16 pm

All Default passwords are raspberry.
Access to pistar setup AP is raspberry.
Access to pistar dashboard is raspberry.
Only when you changed them to something different, are they not raspberry ;-)

Andrew M1DNS, (Mod)

Andrew M1DNS.
Pi-star Admin Team.

Post Reply