Config page Changes (DMR)

Announcements from the Pi-Star Admin Team
Post Reply
User avatar
MW0MWZ
Site Admin
Posts: 917
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Config page Changes (DMR)

Post by MW0MWZ » Sun May 19, 2019 3:22 pm

Today I have pushed a fairly substantial change to the way the DMR ID is handled by the Pi-Star Config page;

In short - the reasoning behind this is that the way DMR IDs are handled by the networks needs to be understood to get the best out of them.

Brand Meister:
This network uses either your bare CCS7/DMR ID (7 digits) *OR* an extended ID, your 7 digit ID, with a 2 digit suffix (between 01 and 99).
Specifically BM does *NOT* accept 8 digit IDs. These have worked in the past, but BM sees 8 digits as a base ID, technically speaking BM DMR IDs are 24 bits, when expressed as an unsigned integer (programming term for a positive only number) this provides a range of IDs from 0 (0000000) to 16777215.

DMR Plus:
Information here is a little sketchy, but it seems that DMR Plus supports CCS7 / DMR ID (7 digits) on all of their masters, and 8 digit (extended) DMR IDs on at least some of their masters (your 7 digit CCS7 ID, plus 1 digit, 1-9).

TGIF:
I believe that they support 7 or 9 digits in a similar way to BM. (I'm going to reach out to the admins there today to make sure).

So why the change - well its been on the cards for a while to better support extended IDs when using DMRGateway, AND specifically 8 digit IDs to NOT work on BrandMeister when using hotspot security, so this change helps enforce the use of 7 or 9 digit IDs but not 8 digits on BM.

Discuss here please: viewtopic.php?f=5&t=1789
Andy

73 de MW0MWZ
http://pistar.uk

Post Reply