Temperature and other additional fields
Posted: Fri Apr 27, 2018 4:20 am
Did anyone succeed to add the Cpu Temperature and/or other additional fields in Nextion Screen?
73's
Page 1 of 1
Re: Temperature and other additional fields
Posted: Fri Apr 27, 2018 6:10 am
That is indeed a nice thing, but think that this is not embedded in MMDVM, but would also like to have this on screen
73's
73's
Re: Temperature and other additional fields
Posted: Wed Jun 27, 2018 5:32 pm
Yes that would be nice
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Re: Temperature and other additional fields
Posted: Tue Jul 17, 2018 12:47 pm
Working (testing at the moment ... ) on it
Re: Temperature and other additional fields
Posted: Sat Aug 18, 2018 5:05 pm
Almost out of beta testing. Still adding new code and integrating ideas from testers and moving things around.
Re: Temperature and other additional fields
Posted: Wed Aug 29, 2018 1:51 pm
See sample shot from Editor: CPU temp, usage and load as disk usage too is on the Model 8 screen layout at www.github.com/PD0DIB.
Also providing a Power Down and Reboot touch-button
The ON7LDS NextionDriver is mandatory, since MMDVMHost isn't providing this info
Read the WiKi fro how-to-install the NextionDriver, see topline of the github reprository => Wiki
Also providing a Power Down and Reboot touch-button
The ON7LDS NextionDriver is mandatory, since MMDVMHost isn't providing this info
Read the WiKi fro how-to-install the NextionDriver, see topline of the github reprository => Wiki
- 2018-08-18 (1).png (29.28 KiB) Viewed 6544 times
Re: Temperature and other additional fields
Posted: Sun Sep 30, 2018 5:14 pm
I am using the Model 8 Screen on a 3.5" Nextion Enhanced. Connection is via a USB > TTL Device. Pi is a Model 3. Modem Board is a Duplex (Bi7TJA).
On the Idle screen I get the additional info (ie Temp, Disk free, CPU Load etc)
On the DMR Scree I do not get the RSSI or BER for both Time Slots. I get all other data for each Time Slot
I there something I need to do to get the RSSi and BER info to show up ?
My configuration settions:
Display: Nextion
Port: /dev/ttyUSB0
Layout: ON7LDS L3
MMDVMHosts Settings:
Nextion:
Port /dev/ttyUSB0
Brightness 50
DisplayClock 1
UTC 0
ScreenLayout 3
IdleBrightness 30
NextionDriver:
Port /dev/ttyUSB0
LogLevel 2
DataFilesPath /usr/local/etc/
GroupsFile groups.txt
DMRidFile stripped.csv
Appreciate any information.
WB2LMA
Chuck Lechner
On the Idle screen I get the additional info (ie Temp, Disk free, CPU Load etc)
On the DMR Scree I do not get the RSSI or BER for both Time Slots. I get all other data for each Time Slot
I there something I need to do to get the RSSi and BER info to show up ?
My configuration settions:
Display: Nextion
Port: /dev/ttyUSB0
Layout: ON7LDS L3
MMDVMHosts Settings:
Nextion:
Port /dev/ttyUSB0
Brightness 50
DisplayClock 1
UTC 0
ScreenLayout 3
IdleBrightness 30
NextionDriver:
Port /dev/ttyUSB0
LogLevel 2
DataFilesPath /usr/local/etc/
GroupsFile groups.txt
DMRidFile stripped.csv
Appreciate any information.
WB2LMA
Chuck Lechner