Frequency

General support for the Pi-Star System
Post Reply
LA9KY
Posts: 1
Joined: Fri Jun 08, 2018 6:52 am

Frequency

Post by LA9KY » Thu Jul 11, 2019 10:53 am

Hi
running v4.1.0 RC3 FYI,
when debugging dmr doing a startup, there is listed TX and RX frequency and power, should i take these values into consideration for offset adjustments ?

part of log
M: 2019-07-11 10:45:41.658 MMDVMHost-20190625_Pi-Star-v4 is running
M: 2019-07-11 10:45:41.658 Debug: MMDVM_HS FW configuration:
M: 2019-07-11 10:45:41.663 Debug: TX freq (Hz): 433600031
M: 2019-07-11 10:45:41.663 Debug: RX freq (Hz): 433600018
M: 2019-07-11 10:45:41.668 Debug: Power set: 63
M: 2019-07-11 10:45:41.668 Debug: D-Star dev (Hz): 1209
M: 2019-07-11 10:45:41.673 Debug: DMR +1 sym dev (Hz): 646
M: 2019-07-11 10:45:41.673 Debug: YSF +1 sym dev (Hz): 900
M: 2019-07-11 10:45:41.678 Debug: P25 +1 sym dev (Hz): 618
M: 2019-07-11 10:45:41.678 Debug: NXDN +1 sym dev (Hz): 365
M: 2019-07-11 10:45:41.683 Debug: POCSAG dev (Hz): 4500
M: 2019-07-11 10:45:51.696 DMR, Logged into the master successfully

Frank/LA9KY

User avatar
MW0MWZ
Site Admin
Posts: 916
Joined: Wed Apr 04, 2018 9:15 pm
Location: Wales, UK
Contact:

Re: Frequency

Post by MW0MWZ » Sat Jul 13, 2019 1:51 pm

The log will show the TX/RX frequency that has been configured, with the current configured offset added - make sense ?
Andy

73 de MW0MWZ
http://pistar.uk

Post Reply